Écran Papier

Getting started

Ten minutes, once and for all.

A device arrives assembled, tested and set to the service you chose. All that’s left is to give it your Wi-Fi, scan the QR code it shows, and put it in place. No app to install, no account to create, no voice assistant involved.


First setup

The six steps.

Unpack and choose the spot

Put the frame where you walk past, not where you sit: a hallway shelf, a kitchen counter, a desk. Electronic ink is read by the room’s light, so the brighter the spot, the better. Avoid constant direct sunlight, which ages the panel early.

Light frames can also be mounted with magnets: on a stainless-steel fridge door, the device holds without drilling, without a stand, and without a visible cable if the model runs on battery.

An ebonised wooden frame held by magnets on a stainless-steel fridge door, showing the week’s swell.

Plug it in

Connect the supplied USB cable to a phone charger or a USB wall socket. Battery models only need a full charge before going in place: expect several months before you need to come back to it.

On first start, the screen itself shows how to give it the Wi-Fi. That’s normal: it has no network yet.

Join the frame’s network

The frame creates its own Wi-Fi network, with no password, named Wignet-XXXX, where the four characters are specific to your device. The name is shown on screen. Join that network from a phone or a computer.

Give it your home Wi-Fi

A setup page opens by itself. If it doesn’t, open a browser and go to 192.168.4.1. Pick your network from the list, type the password, and confirm with Save and connect.

The portal stays open for three minutes. If it closes before you’re done, unplug the frame and plug it back in to reopen it. Once saved, the Wi-Fi is remembered for good: you won’t repeat this step, even after a power cut.

Scan the QR code on screen

The frame restarts, connects, and paints its first image: a QR code, its name, and the address spelled out underneath. An e-paper refresh is quite a show — two to three seconds of black-and-white flashing before the image settles, around thirty seconds of coloured passes on a six-colour screen. That’s how the technology works, not a fault.

Scan the code with your phone’s camera. The settings page of your frame opens in the browser. Bookmark it, or add it to your home screen: it’s the page that will drive the frame for its whole life.

Welcome screen of a new frame: its name, a large QR code, a “scan to set it up” line in French and the address of its settings page.
The welcome screen of a new frame, before it is first set up.

If your frame was delivered already set to its service, it shows that service straight away rather than this QR code: the address of your page is then given to you on delivery, and the welcome screen can be shown again on request.

Choose what it shows

From that page, in any browser: the service on display, the spot, the town or the line, how often it updates, the exact time of the daily refresh and the time slots. A button forces an immediate update, and the page shows the image currently on the frame. Changes apply at the next wake-up.

This page gives access to your frame and nothing else. It asks for no password and no account: the link itself is the key, exactly like a photo-sharing link. Give it to the people in your household, no further.

Day to day

The life cycle of a day.

A device spends most of its time switched off. It wakes up, turns on its radio, asks the server for its image, paints it on the panel, then shuts everything down and sleeps until the next appointment.

Between two wake-ups, the image stays on screen without using any energy: electronic ink is stable at rest. That’s what lets a battery frame last for months, and a plugged-in frame use less than a TV on standby.

StepDuration
Wake-up and Wi-Fi connection2 – 5 s
Image download< 1 s
Panel refresh2 – 3 s (≈ 30 s in colour)
Deep sleepuntil the next cycle

The further apart the wake-ups, the longer the battery lasts. A weather frame set to four updates a day lasts much longer than a transport frame set to every minute.

The models

Several screens, several frames.

ModelScreenUse
Large7.5 " – 800 × 480Week view, tables, detailed forecasts
Large colour7.3 " – 800 × 480Six inks: photos, quotes, colour tables
Medium3.7 " – 360 × 240Today’s weather, next departures, note of the day
Compact2.7 " – 264 × 176One number, one icon, on a desk

The server knows each frame’s size and sends it an image drawn at its exact dimensions: no image is stretched or cropped on the fly.

Shared characteristics

Black-and-white e-paper panel (one bit per pixel) or six colours (E Ink Spectra 6), with no backlight and no touch glass. 2.4 GHz Wi-Fi. Powered by USB or an internal battery depending on the model. Wooden, metal or antique gilt frame, chosen one at a time. No camera. The colour model has a speaker for alarms and sounds; its circuit board also carries two microphones, which our software never turns on.

Care and troubleshooting

What can happen, and what to do.

Symptom

The image no longer changes

The frame can’t reach the network any more. Check the Wi-Fi router, then unplug the frame and plug it back in. If the Wignet-XXXX network reappears, the password has changed: repeat step 4.

Symptom

A grey haze persists

After hundreds of partial refreshes, a ghost image can linger. A full refresh, started from your page, cleans the panel in a few seconds.

Care

Cleaning

A soft, dry cloth on the frame’s glass, as for a picture. No cleaning product, no water, and above all no alcohol on the panel if it is bare.

Care

Charging

On battery models, a discreet indicator appears in a corner of the screen when the battery runs low. One night on a charger is enough.

Moving house

Changing Wi-Fi

Switch off the old router, or ask for a network reset. The frame then reopens its setup portal at the next start: repeat steps 3 and 4, and nothing else — your settings page never changes.

Longevity

Updates

Most of the intelligence lives on the server: a new layout or a new service arrives without touching the frame.

A question that isn’t here?

Special cases, privacy, durability and the rest are covered in the questions.

Read the questions